Description
Sani-Processor toilet system 24 V
Compact Sani-Processor for toilet waste and grey water
Style and comfort like at home
It would be nice even on larger boats if you could choose the sanitary fittings you like at home. SAPRO, developed by Vetus, is the answer to these wishes. SAPRO has an exhaust pump and macerator unit that can be placed separately from the sanitary fittings, for example in the engine room. The toilet seat is connected to the SAPRO by a 102 mm discharge pipe with a minimum pour of 8 mm/metre. When the toilet is flushed, SAPRO shreds and pumps the waste into the septic tank.
The hose used is a Ø 19 mm hose. The flushing and pumping action takes only 10 to 30 seconds and is very quiet. The Vetus "SAHOSE" septic hoses are recommended as discharge hoses.
Product Specifications
- Dimensions (PxLxWxD) 420 x 120 x 360 mm
- Septic tank positioned up to 4 m above the Sani-Processor
- Maserator diameter 98 mm
- Weight 4,8 kg
- Pump output approximately 50l/min with 4 m lift
- Power consumption approximately 370W (12 VDC), 435W (24 VDC), 400W (230
VAC)
- Available for 12 and 24 Volt, 230 Volt/50Hz and 120 V/60Hz
- Maximum allowable water temperature 35 ºC
Connections
- Toilet:From Sani-Processor: Ø 102 mm, max. length 4 m
- Hose from Sani-Processor to septic tank: Ø 19 mm, max length
20 m
- From sink and washbasin: Ø 40 mm
Structure
1. Toilet seat connection, Ø 102 mm
2. Grating
3. Outlet connection, outer diameter Ø 19 mm,
hard plastic or soft plastic inner diameter 25/28/32 mm
4. Sink connection, Ø 19 mm
5. Sink connection, Ø 40 mm
6. Shower or sink connection, Ø 40 mm
7. Shredder (macerator)
8. Electric motor for macerator
9. Discharge pump
10. Swimmer switch
Parts of the installation diagram
1. Hose connection Ø 102 mm (SLVBR100K)
2. Hose connection Ø 40 mm (SLVBR40K - HA3060)
3. Hose connection HA1338
English 
Finnish 
Swedish