Description
Self-priming rubber impeller pump with axle drive A versatile seawater-resistant bronze pump designed for a wide range of applications on board. Their powerful suction capacity makes them excellent marine engine cooling water pumps, bilge pumps, deck wash pumps, fresh water pumps, fuel transfer pumps and pumps for many other applications.
Note! Pulley, belt and hose connections not included. Pump technical characteristics
- - bronze body
- - stainless steel shaft with double ball bearings with permanent lubrication
- - mechanical seal
- - connections 1\" BSP thread
- - drive shaft diameter Ø 17 mm)
Between the vanes of the rotating impeller, the fluid moves from the inlet to the outlet. This design allows relatively large parts to pass through the pump. Liquids can be pumped in the opposite direction by changing the direction of rotation of the pump. Pump yield table
| Pump revolutions/ rpm |
| 700 | 900 | 1400 | 1750 | 2000 |
| Bar | Discharge ltr/min. |
| 0.3 | 16 | 21 | 33 | 41 | 46 |
| 0.6 | 15 | 20 | 32 | 39 | 45 |
| 1,0 | 14 | 19 | 30 | 37 | 42 |
| 1,8 | 13 | 17 | 27 | 33 | 38 |
| 2.5 | - | - | 22 | 28 | 33 |
English 
Finnish 
Swedish