14×19 Solas steel spotter Honda 115 - 250 hp RH

Description

14 "x19" Solas Rubex NS3 New Saturn steel propeller for Honda 115 - 250 hp outboard engines.Hub 15 pulleys 4-3/4" Gearcase Thru Hub Exhaust.

The Solas Rubex NS3 model propeller has RBX-107B loose hub for Honda outboards. The hub is supplied with the propeller.

The Rubex NS3 (New Saturn) model is a high performance all-around propeller with good performance due to its large blade area.

Aluminium or steel propeller?
Most boats come standard with an aluminium propeller. If you are looking for better performance such as top speed and acceleration you should consider a steel propeller.

Good to know when choosing a propeller
Check the size of your current propeller. The propeller size is marked on the side of the propeller hub or on the end of the propeller hub. For example, 13 x 15, the first number is the propeller diameter and the second is the propeller pitch in inches.

A change in propeller pitch can increase or decrease engine rpm.
A 2-inch (2") pitch increase or decrease will usually affect engine rpm by approximately +- 300-400 rpm.
Check the engine manufacturer's recommended rpm range for your outboard engine!
When an engine is purchased, it is often supplied with a propeller called a standard propeller. This propeller is sized to fit as many engine/boat combinations as possible.
The standard propeller may not always be the best option. Two identical boats with identical engines may have different propeller sizes if they are used with different loads or if one boat is used for water skiing, for example.

The propellers may not always be the best choice.