Description
- Multi-purpose rubber-based power sealant for vehicle, boat and industrial use
- 100 ml
Special features:
- multi-purpose, replaces most conventional sealants
- convenient pressure packing, works in all positions and the entire contents are used
- electrically non-conductive and flexible
- adheres well even to oily surfaces
- good resistance to oil, acids as well as alkalis
- works on most materials including. metal, wood, glass, stone and other surfaces
- working temperature +5...+40 °C
- heat resistance -55...+260 °C, momentary +280 °C
Applications:
- gear boxes, compressors
- engine covers, oil caps and bottoms
- water and other pumps, thermostat housings, etc.
- for repairing old gaskets and O-rings
Instruction manual:
- apply the compound to one side of the object to be sealed
- clean the surfaces if necessary before applying the sealant
- if necessary, you can grease the other side of the objects to be sealed to facilitate opening
- press the objects together
- tighten lightly
- carry out the final tightening (if necessary, depending on the object) approx. after 30 minutes
- after use, leave approx. 10 mm of material at the end of the nozzle
- next time, remove the dried plug, this way the product will remain in good condition when opened for up to several months
- continuous exposure to kerosene, diesel and acids should be avoided
- undiluted coolant and glycol may cause the seal to swell
- shelf life 18 months
English 
Finnish 
Swedish